Add on devices for MCB’s and RCD’s
- Series CA Auxiliary:
- Common for all modular protection devices: MCB’s and RCBO’s up to 63A, RCCB’s up to 100A and mains disconnect switches type ASTER (ASTM)
- Can be coupled on both sides of MCB’s and modular switches type ASTM.
- Version with golden contacts, available for low current as well as low voltage applications.
- Stack-on left and right up to 4 CA units.
- Permits the pass-through of busbars, pin & fork, top and bottom, just
- changing the position of the base of the auxiliaries.
- Series CB Auxiliary:
- Common for all modular protection devices: MCB’s and RCBO’s up to 63A, RCCB’s up to 100A and mains disconnect switches type ASTER (ASTM).
- Can be coupled on both sides of MCB’s and modular switches type ASTM.
- Common for all modular protection devices: MCB’s and RCBO’s up to 63A, RCCB’s up to 100A.
- Can be coupled on both sides of MCB’s and modular switches type ASTM.
- This device has 2 change-over contacts, the upper one with changeable function (S/H).
- Two versions: CB SH/HH-R to be coupled on the right side of the protection devices, CBSH/HH-L when assembled on the left side
- No stack-on possibilities (only 1 auxiliary)
- No busbar pass-through facilities
- Tele MP Motor Operator:
- The Tele MP allows to remotely open or close any MCB, RCCB, RCBO or modular switch by means of a push- button or any other automatic management processor (PLC).
- Common device for all modular protection devices.
- Can be coupled on both sides of MCB’s and modular switches, on the right hand side of RCCB’s and RCBO’s.
- Stack-on left and right sides up to 4 modules. One of them can be coupled between the main device and the motor operator.
- Can be locked in off position with a lock.
- Manual operating is possible.
- Shunt Trip Tele L:
- The Tele L allows to remotely switch off any MCB, RCCB or RCBO by means of push-buttons or any other automatic management processor. A built-in contact in series with the coil prevents burn- out damage if the voltage remains.
- Common device for all modular protection devices.
- Can be coupled on both sides of MCB’s and modular switches, on the right side of RCCB’s and RCBO’s.
- Permit the pass-through of busbars, pin & fork, at top or bottom terminals.
- Stack-on left and right side up to 4 modules.
- Undervoltage Release Tele U:
- The Tele U releases the main MCB, RCCB, RCBO or modular switch in case the power supply drops below 0.5xUn. Time delay adjusting up to 300 ms.
- Common device for all modular protection devices.
- Can be coupled on both sides of MCB’s and modular switches, on the right side of RCCB’s and RCBO’s.
- Permit the pass-through of busbars, pin & fork, at top or bottom terminals.
- Stack-on left and right side up to 4 modules.
- Panel Board Switch PBS:
- The panel board switch PBS is a mechanical switch. When the panel frame releases the PBS switch, it will trip the protection devices (MCB’s or RCD’s). Consequently the distribution board will become isolated.
- Common device for all modular protection devices.
- Can be coupled on both sides of MCB’s and modular switches, on the right side of RCCB’s and RCBO’s.
- Permit the pass-through of busbars, pin & fork, at top or bottom terminals.
- Stack-on left and right side up to 4 modules.
- Add-on devices for MCB’s series Hti:
- Should be coupled on the right side of the MCB.
- The shunt trip can be coupled on both sides of the MCB.
GE Power Protection offers you: Customer specific developments for all your applications and requirements, exclusively to meet your
Fix-o-Rail 150 F4
- High protection degree : IP40-IK07
- Total insulation
- CEBEC-approval
- 1234 rows / 14 modules per row
- For all flush mounting installations
- One enclosure for installation in brickwork and studded walls
- Transparent or plain door
- Universal for all modular equipment with a shoulder height of 47 mm and a max. depth of 70 mm
- Wiring space:
- 20 mm behind the mounting frame
- 150 mm between the DIN-rails
- above and below the base
- Removable mounting frame / Removable entries
- Easy to install
- Base, cable entries and protective cover are made in high resistant material
- Polystyreen for the base and cover
- Flame resistance: self extinguishing material, resist the 850°C
- The door and the masking frame are in sheet steel, coated with a white epoxy powder (colour RAL 9010)
- In accordance with EN 604393
- Sturdy enclosure and mounting frame
- Due to the discreet design of the masking frame and door, the Fix-o-Rail 150-F4 offers significant aesthetic appeal
- AColour RAL 9010
- Optional security lock
Fix-o-Rail 150 F1
- Total insulation
- High protection degree IP40
- High impact resistant material
- Centre distance of 150 mm between DIN-rails and 20 mm clearance behind the mounting frame
- 1, 2, 3 and 4 rows / 14 modules per row
- Transparent door and removable mounting frame
- One enclosure can be installed in either brickwork and studded walls
- Universal for all modular equipment with a shoulder height of 47 mm and a max. depth of 70 mm
- Optional security lock
- Polystyreen for the base
- Flame resistance : self extinguishing material, resist the 850°C
- Polycarbonate for the transparent door
- Flame resistance : self extinguishing material, resist the 960°C
- ABS for the covers
- Flame resistance: self extinguishing material, resist the 750°C
Residential Enclosures: Series 55
- Standard : IEC 529
- Material : thermoplastic high impact polyphenylene oxyde
- Total insulation
Abaco F
- Flush mounting
- Total insulation
- Protection degree IP40
- Six dimensions in three colours
- Colours : grey RAL 7030, white RAL 9010 and metallised black
- Range from 2 modules up to 39 modules
- Transparent door made from polycarbonate
- High impact resistance material
- Removable mounting frame
- 20 mm clearance behind the mounting frame
- Colours:
- Grey: RAL 7035
- White: RAL 9010
- Metallised black
Residential Enclosures: Flex-o-Box
Flex-o-Box Junior
- Suitable for surface mounting
- 2.5 mm² -500V
- IP65 protection degree
- Standards and approvals
-
- CEBEC : NBN C 68-685-2-0
- NBN C68-685-1
- VDE: 0606 Teil1
- KEMA: IEC 670
- Colour: RAL 7035
- Material: resists the 750°C incandescent wire test
- Halogen-free
- Operating temperature: 5°C to +60°C
- Total insulation
- Eight flexible entries
- 7 x ø20 in the side wall
- 1 x ø20 in the back
- Suitable for cable max ø20
- Suitable for tubes 5/8" and 3/4"
Flex-o-Box JB6
- Suitable for surface mounting
- 6 mm² – 500V
- IP65 protection degree
- Standards and approvals
-
- CEBEC: NBN C6868520
- NBN C686851
- VDE : 0606
- KEMA : IEC 670
- Colour : RAL 7035
- Material: resists the 750°C incandescent wire test
- Halogen-free
- Operating temperature: 5°C to +60°C
- Total insulation
- Nine flexible entries
- 7 x PG16 in the side wall
- 2 x ø20 mm max entries in the back of the base
- Suitable for cable max ø20
- Suitable for tubes 5/8" and 3/4"
- Suitable for cable seals (8 mm min thread length)
Fix-o-Rail Senior
- Secure : total insulation
- Double wall : a steel outer wall plus an inner insulated extruded wall
- Protection degree : IP41-IK08
- Universal : for DINrail equipment up to 92.5 mm
- Installation friendly : ample wiring room and a removable mounting frame
- Flexible cable entries, integrated in the base