• 11151 Amman, Jordan

Residential

  1. Home
  2. GE Products
  3. Residential

Tele REC: The Ultimate Reconnection System forRCCB’s

Ensures power continuity in critical applications.

The Tele REC relay automatically recloses the RCCB after an earth leakage or a manual disconnect. The relay will attempt to re-close 6 times with different time intervals between re-close attempts. After 6 unsuccessful attempts the Tele REC is locked.

Features

  • Status indicator: The yellow lever clearly indicates the status of the Tele REC. In position 1 the relay is ready to work, in position 0 the relay is blocked both electrically and mechanically.
  • Easy connection: The RCCB toggle slides easily into the toggle actuator of the relay.
  • Part of the family: For each series of RCCB’s – ElfaPlus, Redline and DMS line – a specific Tele REC reconnector is available.
  • Auxiliary contact: Tele REC is equipped with an auxiliary contact (LI) to operate the re-closing system from a push-button.
  • Stable and secure: Strong clips to ensure a stable connection between the RCCB and the Tele REC relay.
  • Full awareness: The relay is also equipped with a volt free output to indicate the status of the protection (connected/ disconnected).
  • One fits all: Both 2 modules and 4 modules RCCB’s can be connected to the reconnection relay Tele REC.

Complete range of reconnection relays

 

  • Tele REC DMS: Specially designed for the residential market.
  • Tele REC BASIC Type A and AC: For the residential/commercial markets. Commercial, banks, office buildings, hospitals,..
  • Tele REC BASIC Type Ai: Power maintenance and reliability in one device. Banks, hospitals, farms, public lighting, traffic lighting,…
  • Tele REC PLUS: For the commercial/industrial markets. The reconnection relay Tele REC Plus can be easily coupled to any ElfPlus RCCB.
  • Tele REC SOLAR: Specially designed for photovoltaic applications. The reconnection relay Tele REC SOLAR can be easily coupled to MCB’s series EP100 UC.

 

Read More

Modular 200 Type B
  • In accordance with BS5486 and BS EN 60439-3
  • Durable powder coated finish
  • Matching light grey throughout the range
  • All incomers benefit from positive contact indication
  • Modular extension boxes to install modular control devices
  • Pan assembly can be easily removed to ease installation
  • One piece (no welds or rivets) phase busbar – NO hot spots!
  • Ample space behind pan assembly aids wiring installation
  • Split terminal bars to reduce wiring installation time
  • Neutral disconnect as standard to aid speedy testing
  • Doors can be removed to ease installation
  • Sturdy folded sheet steel construction
  • Accepts 6kA, 10kA and 15kA MCB’s
  • Generous wiring room even when using 1 module RCBO
  • Clean earth facility available on request
  • Reversible doors (left or right mounting)
  • Door can be equipped with a security lock
  • Document holder included
  • Door on all units with bounding conductors
Read More

Modular 200 Type A
  • In accordance with BS5486 and BS EN 60439-3
  • Sturdy folded sheet steel construction
  • Durable structured powder coated finish
  • Matching light grey used throughout range
  • Phase busbar rating 120A
  • Incoming device cable terminal capacity 50mm²
  • Terminal bar cable capacity 25mm²
  • Shrouded neutral terminal bar
  • Generous wiring room even using 1 module RCBO
  • Comprehensive range of incomers
  • Pre assembled ready to accept MCBs and RCBOs
  • DIN enclosure option so you can "design it yourself"

 

Read More

Fix-o-Rail 150
  • High protection degree: IP40
  • Total insulation
  • High impact strength: IK08
  • 1-2-3-4 rows / 18 modules per row
  • For surface mounting
  • With transparent or grey door, can be opened to 180°
  • For DINrail equipment up to 92.5 mm
  • Optional security lock
  • Generous wiring room:
    • 30 mm behind the mounting frame
    • 150 mm centre distance between DIN rails
    • above and below the base
    • shallow base
  • Fixation with four captive quarter-turn screws
  • Removable mounting frame
  • All knockouts are easy to remove
  • High impact resistance material, colour RAL 7035
  • Enclosure and mounting frame are extremely sturdy
  • Polystyreen for the base
  • Flame resistance: self extinguishing material, resist the 650°C
  • Polycarbonate for the lid
  • Flame resistance: self extinguishing material, resist the 960°C

 

Read More

Fix-o-rail Classic
  • Protection degree: IP30
  • IP40 with door (optional)
  • Colour: RAL 9010
  • 13, 26, 39 and 52 modules
  • Total insulation (with backplate and door)
  • Transparent or plain door
  • Surface mounting
  • Adjustable DINrail
  • Polystyreen for the covers
  • Flame resistance: self extinguishing material, resist the 650°C
  • Polycarbonate for the transparent doors
  • Flame resistance: self extinguishing material, resist the 960°C

 

Read More

Fix-o-Rail 150 M
  • For surface mounting
  • Suitable for DIN-rail mounting devices up to 70 mm as MCB’s, RCCB’s, relays, switches, timers, contactors, etc
  • Manufactured from panel flat quality mild steel, cold reduced CR4 from 1.0 mm
  • Pre-treated prior to powder coating, fully immersed in iron phosphate solution
  • Electrostatic powder coating on a continuous line base colour RAL 7035
  • Slotted fixing holes on the base permit all leveling adjustment
  • Earth and neutral fitted to the base, each terminal being able to accept a 16 mm² stranded round conductor
  • With DIN-rails
  • Earth and neutral terminals standard
  • Distance between two DIN-rails: 150 mm
  • Generous wiring room
  • With plain grey or transparent door
  • Door opens 180°
Read More

Abaco S
  • Protection degree IP40
  • Total insulation : class II
  • Four dimensions in two colours
  • Colours : grey RAL 7030 and white RAL 9010
  • Range from 8 modules up to 39 modules
  • Flame resistance : self extinguishing material, resists the 650°C
  • Operating temperature : 15°C to +60°C
  • Chemical resistance against water, salt solution, acid rain
  • Surface mounting with flat panels; easy mounting of cable entries
  • The DIN rails can be taken off to make the equipment externally
  • The position of the mounting frame can be adjusted
Read More

Wiring devices: Switches and sockets-outlets

""

SintraPlus – Flush mounting

SintraPlus stands for a series of mechanisms providing the thousand and one solutions that design, ambiance, decoration and good taste demand nowadays. High quality finishing, combined with the use of specific raw materials for these products, maintain the shine and original appearance of their first day.The colours have been designed for use in any environment: teenager, modern, informal, distinguished,classic, etc.

  • Basic range
  • Metallic range
  • Look range

 

Sintra 65 – Outdoor applications

For all outdoor applications. IP65 watertight and dustproof.

Douro – Surface mounting

The Douro range is a surface mounting range valid for all interiors and requirements. Douro is personalised with a beautiful grey vertical line which can be interchanged with four other colours. Easy to install and user friendly. Two ranges of colours: white and ivory for decoration and renovation.

 

Read More

Add on devices for MCB’s and RCD’s
    Series CA Auxiliary: 

  • Common for all modular protection devices: MCB’s and RCBO’s up to 63A, RCCB’s up to 100A and mains disconnect switches type ASTER (ASTM)
  • Can be coupled on both sides of MCB’s and modular switches type ASTM.
  • Version with golden contacts, available for low current as well as low voltage applications.
  • Stack-on left and right up to 4 CA units.
  • Permits the pass-through of busbars, pin & fork, top and bottom, just
  • changing the position of the base of the auxiliaries.
    Series CB Auxiliary: 

  • Common for all modular protection devices: MCB’s and RCBO’s up to 63A, RCCB’s up to 100A and mains disconnect switches type ASTER (ASTM).
  • Can be coupled on both sides of MCB’s and modular switches type ASTM.
  • Common for all modular protection devices: MCB’s and RCBO’s up to 63A, RCCB’s up to 100A.
  • Can be coupled on both sides of MCB’s and modular switches type ASTM.
  • This device has 2 change-over contacts, the upper one with changeable function (S/H).
  • Two versions: CB SH/HH-R to be coupled on the right side of the protection devices, CBSH/HH-L when assembled on the left side
  • No stack-on possibilities (only 1 auxiliary)
  • No busbar pass-through facilities
    Tele MP Motor Operator: 

  • The Tele MP allows to remotely open or close any MCB, RCCB, RCBO or modular switch by means of a push- button or any other automatic management processor (PLC).
  • Common device for all modular protection devices.
  • Can be coupled on both sides of MCB’s and modular switches, on the right hand side of RCCB’s and RCBO’s.
  • Stack-on left and right sides up to 4 modules. One of them can be coupled between the main device and the motor operator.
  • Can be locked in off position with a lock.
  • Manual operating is possible.
    Shunt Trip Tele L: 

  • The Tele L allows to remotely switch off any MCB, RCCB or RCBO by means of push-buttons or any other automatic management processor. A built-in contact in series with the coil prevents burn- out damage if the voltage remains.
  • Common device for all modular protection devices.
  • Can be coupled on both sides of MCB’s and modular switches, on the right side of RCCB’s and RCBO’s.
  • Permit the pass-through of busbars, pin & fork, at top or bottom terminals.
  • Stack-on left and right side up to 4 modules.
    Undervoltage Release Tele U:  

  • The Tele U releases the main MCB, RCCB, RCBO or modular switch in case the power supply drops below 0.5xUn. Time delay adjusting up to 300 ms.
  • Common device for all modular protection devices.
  • Can be coupled on both sides of MCB’s and modular switches, on the right side of RCCB’s and RCBO’s.
  • Permit the pass-through of busbars, pin & fork, at top or bottom terminals.
  • Stack-on left and right side up to 4 modules. 
    Panel Board Switch PBS:

  • The panel board switch PBS is a mechanical switch. When the panel frame releases the PBS switch, it will trip the protection devices (MCB’s or RCD’s). Consequently the distribution board will become isolated.
  • Common device for all modular protection devices.
  • Can be coupled on both sides of MCB’s and modular switches, on the right side of RCCB’s and RCBO’s.
  • Permit the pass-through of busbars, pin & fork, at top or bottom terminals.
  • Stack-on left and right side up to 4 modules.
    Add-on devices for MCB’s series Hti: 

  • Should be coupled on the right side of the MCB.
  • The shunt trip can be coupled on both sides of the MCB.

GE Power Protection offers you: Customer specific developments for all your applications and requirements, exclusively to meet your

Read More

Fix-o-Rail 150 F4
  • High protection degree : IP40-IK07
  • Total insulation
  • CEBEC-approval
  • 1234 rows / 14 modules per row
  • For all flush mounting installations
  • One enclosure for installation in brickwork and studded walls
  • Transparent or plain door
  • Universal for all modular equipment with a shoulder height of 47 mm and a max. depth of 70 mm
  • Wiring space:
    • 20 mm behind the mounting frame
    • 150 mm between the DIN-rails
    • above and below the base
  • Removable mounting frame / Removable entries
  • Easy to install
  • Base, cable entries and protective cover are made in high resistant material
  • Polystyreen for the base and cover
  • Flame resistance: self extinguishing material, resist the 850°C
  • The door and the masking frame are in sheet steel, coated with a white epoxy powder (colour RAL 9010)
  • In accordance with EN 604393
  • Sturdy enclosure and mounting frame
  • Due to the discreet design of the masking frame and door, the Fix-o-Rail 150-F4 offers significant aesthetic appeal
  • AColour RAL 9010
  • Optional security lock

 

Read More