• 11151 Amman, Jordan

Miniature Circuit Breakers: 10kA 80A to 125AHti

The miniature circuit breakers of the Series Hti are the biggest breakers within our range of MCB’s (210 g/pole). They are meant to be used for heavier applications, their nominal current goes upto 125A and they have a calibration temperature of 40°C (for the other MCB’s within our range this is 30°C, except for the Series GT).

This is also reflected in the terminal capacity for rigid cables, 70mm 2 , while for other miniature circuit breakers this is maximum 16 (C-series) or 35mm 2.

Following add-on devices are available for this product: auxiliary contacts, shunt trip (Tele L) and panel board switch (PBS).

No accessories are available for the Series Hti.

See below the main features for this range.

Features / Producttypes Hti
Standards EN/IEC 60947-2
Short circuit breaking capacity (Acc.to EN/IEC 60947-2, curves B,C) (kA) 10, 15
Tripping characteristics B, C, D
Thermal settings ln (A) 80-100-125
Rated voltage AC Un (V) 230/400
Minimum operating voltage U B min (V) 12
Selectivity class
Mechanical/electrical endurance 10000/4000
Tropicalisation acc.to EN/IEC 60068-2 95%RH at 55°C
Terminal capacity flexible/rigid cable (mm 2 ) 70
Poles 1
  2
  3
  4
Weight (g/pole) 210
CE-marking X
Auxiliary contacts yes
Tele U (Undervoltage release)
Tele L (Shunt Trip) yes
Tele MP (Motor Operator)
PBS (Panel board switch) yes
Busbar system pin (top/bottom)
Busbar system fork (top/bottom)
Accessories
Read More

Fix-o-Rail Metal Design

  • For surface mounting
  • Suitable for DIN-rail mounting devices up to 70 mm as MCB’s, RCCB’s, relays, switches, timers, contactors, etc
  • Manufactured from panel flat quality mild steel, cold reduced CR4 from 1.0 mm
  • Pre-treated prior to powder coating, fully immersed in iron phosphate solution
  • Electrostatic powder coating on a continuous line base colour RAL 7035
  • Slotted fixing holes on the base permit all leveling adjustment
  • Earth and neutral fitted to the base, each terminal being able to accept a 16 mm² stranded round conductor
  • With DIN-rails
  • Earth and neutral terminals standard
  • Distance between two DIN-rails: 150 mm
  • Generous wiring room
  • With plain grey or transparent door
  • Door opens 180°
Read More

Modular Control Devices – Series PR – PriorityRelays

Priority relays offer the possibility to limit the energy consumption in installations with a defined maximum power. This limitation is getting measuring the installation total current continuously and in the case consumption would be higher then fixed value, priority relay would disconnect the non-priority load.

 

  • In accordance with IEC 61095
  • Nominal voltage : 230V
  • Contact type : NO or NC
  • 2 Modules
  • IP20 terminals
Read More

Modular Control Devices – Series MT -Measurement Devices

Comprehensive range of analogue and digital measurement devices to measure voltage, current, frequency, hours, watts, kilowatt hours, power factor etc. in single phase and three phase circuits.

  • In accordance with BSEN60051-1-2
  • Analogue voltmeter, ammeter, frequency and hour counter meter
  • Digital voltmeter, ammeter, frequency, wattmeter, kWh meter
  • Digital multimeter / network analyser with optional remote communication
  • Direct or indirect (CT) connection
  • Appropriate CTs also available (not shown)
  • Signal converters and selector switches
  • DIN rail mounting
Read More

Fix-o-Rail 144 F/S

  • In accordance with EN60439-1 and IEC 439-1
  • Protection degree:
    • IP40 – IK07 without door
    • IP41 – IK08 with plain door
    • IP41 – K07 with transparent door
  • Each DIN-rail can be equipped with 24 modules
  • Centre distance between two DIN-rails : 150 mm
  • Flush mounting depth : 105 mm
  • Can be equipped with the Record Plus 160A D-frame
  • Colour : RAL 7035

Electrical properties

  • Designated voltage : 415Vac
  • Designated current : 160A

Masking frame and door

  • Rodged masking frame
  • Manufactured in quality mild steel of 1 mm thick, cold reduced
  • Pre-treated prior to electrostatic powder coating in RAL 7035 (light grey)
  • Transparent or plain door

Protection plate

  • Made from polyester reinforced with glass fibre
  • Easy fixations with 1/4 screws

Base

  • Ridged base (mono-block)
  • Manufactured in sendzimir zinc plated steel of 1 mm thick (F.O.R 144F)
  • Sidewalls foreseen with position lugs (F.O.R 144F)
  • Pre-treated prior to electrostatic powder coating in RAL 7035, light grey (F.O.R 144S)
  • Knock-outs in the upper, lower and the bottom side of the base
  • Fixing points for the fixation of cables with cable ties

Mounting frame

  • Ridged and removable mounting frame
  • Adjustable in depth (+/20mm) (F.O.R 144F)
  • Adjustable left or right (+/10mm) (F.O.R 144F)
  • Distance between two DIN-rails: 150 mm

Door

  • Transparent or plain door, security lock included

Earth bar (L = 380 mm)

  • Copper bar, 12×5 mm, 18 x M5 threaded holes + connectors and screws

 

Read More

Modular Control Devices – Series T -Transformers

Used to supply power to bells and buzzers in the home or to supply power to control circuits for relays, contactors, impulse switches during the control of lighting and heating.

  • In accordance with IEC 61558
  • Bell transformer output power from 5VA to 30VA
  • Safety transformer output power from 15VA to 60VA
  • Bells and buzzers
  • Two tappings on the secondary 8, 12 and 24V combinations
  • 220-240V primary voltage
  • Number of modules 1, 2, 4 or 6
  • IP20 protection
  • DIN rail mounting
Read More

Residential Enclosures – Fix-o-Rail Junior

  • High resistance material
  • Modern design
  • Compact construction
  • High protection degree
  • IP40: 4 modules
  • IP43: 8 modules
  • Total insulation
  • Total security
  • Transparent cover allowing visibility of devices
  • For all modular equipment
  • Available in 4 and 8 modules
  • Colour: RAL 7035
  • Polystyreen for the base
  • Flame resistance: self extinguishing material, resist the 650°C
  • Polycarbonate for the lid
  • Flame resistance: self extinguishing material, resist the 960°C
Read More

VBS-Busbar system : Insulated Busbars

  • Insulated busbar, pin type system
  • Pin type for 2P or 1PN and 3P systems
  • Easy to install
  • Flat design = gain of space in the enclosure
  • Easy to use : cutting instead of sawing
  • Clear visibility when connecting the power supply cables
  • Universal for all power supplies (2 x 230V, 3 x 230V and 3 x 400 V + N)
Read More