Residual Current Circuit Breakers – RCBB’sSeries BP/BD
People protection against the risk of electrocution and property protection against the risk of an electrical fire.
- In accordance with IEC 61008
- Additional protection for people (up to 10/30mA) and property (above 30mA)
- Ratings 16A,25A,40A,63A,80A and 100A
- 30mA,100mA,300mA, 500mA and 1000mA sensitivity options
- 2P 2Module, 4P 4Module
- High resistance to nuisance tripping
- Type AC, A, S or types Ai and Si
- Can be fitted with auxiliary contacts
Fix-o-rail Metal Standard
- For surface mounting
- Suitable for DIN-rail mounting devices up to 70 mm as MCB’s, RCCB’s, relays, switches, timers, contactors, etc
- Manufactured from panel flat quality mild steel, cold reduced CR4 from 1.0 mm
- Pre-treated prior to powder coating, fully immersed in iron phosphate solution
- Electrostatic powder coating on a continuous line base colour RAL 7035
- Slotted fixing holes on the base permit all leveling adjustment
- Earth and neutral fitted to the base, each terminal being able to accept a 16 mm² stranded round conductor
- With DIN-rails
- Earth and neutral terminals standard
- Distance between two DIN-rails: 150 mm
- Generous wiring room
- With plain grey or transparent door
- Door opens 180°
Modular Control Devices – Surgeguard – Surgearresters
Used to protect home electrical appliances (TV, HiFi, VCR, washing machines, dish washers and PC’s) and commercial/industrial building equipment (computer, communications network, security, fire alarm and PLC equipment etc.) from voltage surges generated by lightning strikes, motors, frequency converters etc.
- In accordance with IEC61643-1 NFC61-740
- Protection of 1P, 1P+N (230V) and 3P+N (440V)
- Number of modules 1, 2 and 5
- Time saving plug in versions available
- End of life indicators on all surge arresters
- Some combinations with 1c/o contact
- Imax from 20 to 80kA
- IN from 5kA to 20kA
- Up from 960V to 1950V
- All MOV devices offer a built in thermal fuse
- DIN rail mounting
Fix-o-Rail Metal Design
- For surface mounting
- Suitable for DIN-rail mounting devices up to 70 mm as MCB’s, RCCB’s, relays, switches, timers, contactors, etc
- Manufactured from panel flat quality mild steel, cold reduced CR4 from 1.0 mm
- Pre-treated prior to powder coating, fully immersed in iron phosphate solution
- Electrostatic powder coating on a continuous line base colour RAL 7035
- Slotted fixing holes on the base permit all leveling adjustment
- Earth and neutral fitted to the base, each terminal being able to accept a 16 mm² stranded round conductor
- With DIN-rails
- Earth and neutral terminals standard
- Distance between two DIN-rails: 150 mm
- Generous wiring room
- With plain grey or transparent door
- Door opens 180°
Modular Control Devices – Series PR – PriorityRelays
Priority relays offer the possibility to limit the energy consumption in installations with a defined maximum power. This limitation is getting measuring the installation total current continuously and in the case consumption would be higher then fixed value, priority relay would disconnect the non-priority load.
- In accordance with IEC 61095
- Nominal voltage : 230V
- Contact type : NO or NC
- 2 Modules
- IP20 terminals
Fix-o-Rail Covers
- Protection degree : IP30
- Made from high resistance ABS
- Flame resistance : self extinguishing material, resist the 960°C
- Colour : Grey RAL 7035
- Installation temperature : 15°C up to +60°C
Modular Control Devices – Series MT -Measurement Devices
Comprehensive range of analogue and digital measurement devices to measure voltage, current, frequency, hours, watts, kilowatt hours, power factor etc. in single phase and three phase circuits.
- In accordance with BSEN60051-1-2
- Analogue voltmeter, ammeter, frequency and hour counter meter
- Digital voltmeter, ammeter, frequency, wattmeter, kWh meter
- Digital multimeter / network analyser with optional remote communication
- Direct or indirect (CT) connection
- Appropriate CTs also available (not shown)
- Signal converters and selector switches
- DIN rail mounting
Fix-o-Rail 144 F/S
- In accordance with EN60439-1 and IEC 439-1
- Protection degree:
- IP40 – IK07 without door
- IP41 – IK08 with plain door
- IP41 – K07 with transparent door
- Each DIN-rail can be equipped with 24 modules
- Centre distance between two DIN-rails : 150 mm
- Flush mounting depth : 105 mm
- Can be equipped with the Record Plus 160A D-frame
- Colour : RAL 7035
Electrical properties
- Designated voltage : 415Vac
- Designated current : 160A
Masking frame and door
- Rodged masking frame
- Manufactured in quality mild steel of 1 mm thick, cold reduced
- Pre-treated prior to electrostatic powder coating in RAL 7035 (light grey)
- Transparent or plain door
Protection plate
- Made from polyester reinforced with glass fibre
- Easy fixations with 1/4 screws
Base
- Ridged base (mono-block)
- Manufactured in sendzimir zinc plated steel of 1 mm thick (F.O.R 144F)
- Sidewalls foreseen with position lugs (F.O.R 144F)
- Pre-treated prior to electrostatic powder coating in RAL 7035, light grey (F.O.R 144S)
- Knock-outs in the upper, lower and the bottom side of the base
- Fixing points for the fixation of cables with cable ties
Mounting frame
- Ridged and removable mounting frame
- Adjustable in depth (+/20mm) (F.O.R 144F)
- Adjustable left or right (+/10mm) (F.O.R 144F)
- Distance between two DIN-rails: 150 mm
Door
- Transparent or plain door, security lock included
Earth bar (L = 380 mm)
- Copper bar, 12×5 mm, 18 x M5 threaded holes + connectors and screws
Modular Control Devices – Series T -Transformers
Used to supply power to bells and buzzers in the home or to supply power to control circuits for relays, contactors, impulse switches during the control of lighting and heating.
- In accordance with IEC 61558
- Bell transformer output power from 5VA to 30VA
- Safety transformer output power from 15VA to 60VA
- Bells and buzzers
- Two tappings on the secondary 8, 12 and 24V combinations
- 220-240V primary voltage
- Number of modules 1, 2, 4 or 6
- IP20 protection
- DIN rail mounting
Residential Enclosures – Fix-o-Rail Junior
- High resistance material
- Modern design
- Compact construction
- High protection degree
- IP40: 4 modules
- IP43: 8 modules
- Total insulation
- Total security
- Transparent cover allowing visibility of devices
- For all modular equipment
- Available in 4 and 8 modules
- Colour: RAL 7035
- Polystyreen for the base
- Flame resistance: self extinguishing material, resist the 650°C
- Polycarbonate for the lid
- Flame resistance: self extinguishing material, resist the 960°C