GE Products Archives - Page 3 of 15

Miniature Circuit Breakers: 10kA 80A to 125AHti

Miniature Circuit Breaker (MCB), Residential

The miniature circuit breakers of the Series Hti are the biggest breakers within our range of MCB’s (210 g/pole). They are meant to be used for heavier applications, their nominal current goes upto 125A and they have a calibration temperature of 40°C (for the other MCB’s within our range this is 30°C, except for the Series GT).

This is also reflected in the terminal capacity for rigid cables, 70mm ² , while for other miniature circuit breakers this is maximum 16 (C-series) or 35mm ².

Following add-on devices are available for this product: auxiliary contacts, shunt trip (Tele L) and panel board switch (PBS).

No accessories are available for the Series Hti.

See below the main features for this range.

Features / Producttypes	Hti
Standards	EN/IEC 60947-2
Short circuit breaking capacity (Acc.to EN/IEC 60947-2, curves B,C) (kA)	10, 15
Tripping characteristics	B, C, D
Thermal settings ln (A)	80-100-125
Rated voltage AC Un (V)	230/400
Minimum operating voltage U B min (V)	12
Selectivity class	–
Mechanical/electrical endurance	10000/4000
Tropicalisation acc.to EN/IEC 60068-2	95%RH at 55°C
Terminal capacity flexible/rigid cable (mm ² )	70
Poles	1
	2
	3
	4
Weight (g/pole)	210
CE-marking	X
Auxiliary contacts	yes
Tele U (Undervoltage release)	–
Tele L (Shunt Trip)	yes
Tele MP (Motor Operator)	–
PBS (Panel board switch)	yes
Busbar system pin (top/bottom)	–
Busbar system fork (top/bottom)	–
Accessories	–

Fix-o-Rail Metal Design

Residential, Residential Enclosures

For surface mounting
Suitable for DIN-rail mounting devices up to 70 mm as MCB’s, RCCB’s, relays, switches, timers, contactors, etc
Manufactured from panel flat quality mild steel, cold reduced CR4 from 1.0 mm
Pre-treated prior to powder coating, fully immersed in iron phosphate solution
Electrostatic powder coating on a continuous line base colour RAL 7035
Slotted fixing holes on the base permit all leveling adjustment
Earth and neutral fitted to the base, each terminal being able to accept a 16 mm² stranded round conductor
With DIN-rails
Earth and neutral terminals standard
Distance between two DIN-rails: 150 mm
Generous wiring room
With plain grey or transparent door
Door opens 180°

Modular Control Devices – Series PR – PriorityRelays

Modular Control Devices, Residential

Priority relays offer the possibility to limit the energy consumption in installations with a defined maximum power. This limitation is getting measuring the installation total current continuously and in the case consumption would be higher then fixed value, priority relay would disconnect the non-priority load.

In accordance with IEC 61095
Nominal voltage : 230V
Contact type : NO or NC
2 Modules
IP20 terminals

Fix-o-Rail Covers

Residential, Residential Enclosures

Protection degree : IP30
Made from high resistance ABS
Flame resistance : self extinguishing material, resist the 960°C
Colour : Grey RAL 7035
Installation temperature : 15°C up to +60°C

Modular Control Devices, Residential

Comprehensive range of analogue and digital measurement devices to measure voltage, current, frequency, hours, watts, kilowatt hours, power factor etc. in single phase and three phase circuits.

In accordance with BSEN60051-1-2
Analogue voltmeter, ammeter, frequency and hour counter meter
Digital voltmeter, ammeter, frequency, wattmeter, kWh meter
Digital multimeter / network analyser with optional remote communication
Direct or indirect (CT) connection
Appropriate CTs also available (not shown)
Signal converters and selector switches
DIN rail mounting

Fix-o-Rail 144 F/S

Residential, Residential Enclosures

In accordance with EN60439-1 and IEC 439-1
Protection degree:
- IP40 – IK07 without door
- IP41 – IK08 with plain door
- IP41 – K07 with transparent door
Each DIN-rail can be equipped with 24 modules
Centre distance between two DIN-rails : 150 mm
Flush mounting depth : 105 mm
Can be equipped with the Record Plus 160A D-frame
Colour : RAL 7035

Electrical properties

Designated voltage : 415Vac
Designated current : 160A

Masking frame and door

Rodged masking frame
Manufactured in quality mild steel of 1 mm thick, cold reduced
Pre-treated prior to electrostatic powder coating in RAL 7035 (light grey)
Transparent or plain door

Protection plate

Made from polyester reinforced with glass fibre
Easy fixations with 1/4 screws

Base

Ridged base (mono-block)
Manufactured in sendzimir zinc plated steel of 1 mm thick (F.O.R 144F)
Sidewalls foreseen with position lugs (F.O.R 144F)
Pre-treated prior to electrostatic powder coating in RAL 7035, light grey (F.O.R 144S)
Knock-outs in the upper, lower and the bottom side of the base
Fixing points for the fixation of cables with cable ties

Mounting frame

Ridged and removable mounting frame
Adjustable in depth (+/20mm) (F.O.R 144F)
Adjustable left or right (+/10mm) (F.O.R 144F)
Distance between two DIN-rails: 150 mm

Door

Transparent or plain door, security lock included

Earth bar (L = 380 mm)

Copper bar, 12×5 mm, 18 x M5 threaded holes + connectors and screws

Modular Control Devices – Series T -Transformers

Modular Control Devices, Residential

Used to supply power to bells and buzzers in the home or to supply power to control circuits for relays, contactors, impulse switches during the control of lighting and heating.