Miniature Circuit Breakers: Series C (1+N,1Mod)
The Series C miniature circuit breakers are covering a complete range of 1Pole + Neutral in 1 module with different short circuit breaking capacities and tripping characteristics.
These MCB’s can be delivered with following add-on devices: auxiliary contacts and shunt trip (tele L).
Accessories are available for the Series C.
See below the main features for this range
| Features / Producttypes | C30 | C45 | C60 |
| Standards | EN/IEC 60898-1 | EN/IEC 60898-1 | EN/IEC 60898-1 |
| – | EN/IEC 60947-2 | EN/IEC 60947-2 | |
| Short circuit breaking capacity (kA) (AC, 60898) | 3 | 4.5 | 6 |
| Tripping characteristics | C | B, C | B, C |
| Thermal settings ln (A) | 2-32 | ||
| Rated voltage AC Un (V) | 230 | ||
| Minimum operating voltage U B min (V) | 12 | ||
| Selectivity class | 3 | ||
| Mechanical/electrical endurance | 20000/10000 | ||
| Tropicalisation acc.to EN/IEC 60068-2 | 95%RH at 55°C | ||
| Terminal capacity flexible/rigid cable (mm 2 ) | 10-16 | ||
| Poles | 1+N, 1 mod. | ||
| Weight (g/pole) | 120 | ||
| CE-marking | X | ||
| KEMA | X | ||
| Auxiliary contacts | yes | ||
| Tele U (Undervoltage release) | – | ||
| Tele L (Shunt Trip) | yes | ||
| Tele MP (Motor Operator) | – | ||
| PBS (Panel board switch) | – | ||
| Busbar system pin (top/bottom) | yes/yes | ||
| Busbar system fork (top/bottom) | – | ||
| Accessories | yes |
Modular Control Devices – Analogue TimeSwitches
Going from the pre-programmed switching of lighting (car parks, public roads) over pre-programmed switching of heating equipment to the pre-programmed switching of motors for pumps and fans and even to presence simulation.Easy to program by means of a dial on the front of the timer.
- In accordance with BSEN60669-2-3, VDE 0633
- 1, 2 channel versions
- Nominal current 16A/250V
- Operating voltage 220-240V
- With or without battery backup
- Available in day, week, day-day and day-week programmable versions
- Number of modules 1, 3 or 6
- Can be surface mounted or DIN rail mounted
Modular Control Devices – Pulsar T – TimeRelays
For lighting or ventilation applications where time delays are required either "ON" or "OFF".
- In accordance with BSEN60669-2-3
- Switching capacity 10A/250V
- 1c/o contact
- 1 module width
- Operating voltage 12-230V
- IP20 protection
- Available in: Delay On, Delay Off, Delay On/Off, Positive edge & Negative edge single shot, Symetrical flasher, Multifunctional
- DIN rail mounted
Modular Control Devices – Pulsar TS – StaircaseSwitches
Used for lighting or ventilation of staircases and halls etc. Push-button operated single-shot timer, switching the power to the load after the push-button has been pushed briefly, and switching off again after the presetted time has elapsed.
- In accordance with BSEN60669-1, VDE0632
- Delays from 0.5 to 12min
- 16A/250V nominal rating
- 1n/o contact
- 1 module width
- Operating voltage 230V
- IP20 protection
- Available in : Electromechanical, Electronic,Electronic Flasher, Din add-on module
- DIN rail mounted
Modular Control Devices – Pulsar S – ImpulseSwitches
Used to electromechanically or electronically control the switching of lighting and heating loads via a (brief) impulse to energise the control circuit in the home, commercial or industrial application.
- In accordance with BSEN60669-1, IEC 60669-1
- 16A or 25A nominal current
- 1P, 2P (1 module) and 4P (2 module) with various contact combinations
- 8V, 12V, 24V, 48V, 230V AC or DC Coils
- DIN rail mounting
- Circuit indicator window allowing clear labeling of circuits
- Central command modules (add-on or stand alone) for the control of several impulse switches
- Multilevel central command modules (add-on) for the control of several levels of impulse switches eg. Lighting in an office block
- 1n/o 1n/c left mounting auxiliary contact available
- IP20 terminals
- Contact flag indication
Modular Control Devices – Contax – Relays
Used for the switching of lighting and heating loads
- In accordance with BSEN60669-1
- 16A nominal current
- 1P, 2P (1 module) and 4P (2 module) with various contact combinations
- 12V, 24V, 48V, 230V AC or DC Coils
- DIN rail mounting
- Circuit indicator window allowing clear labeling of circuits
- 1 n/o 1 n/c left mounting auxiliary contact available
- IP20 terminals
- Contact flag indication
Modular Control Devices – Contax -Contactors
Used for the switching of lighting, heating, motor, pump and fan loads etc.
Day night contactors are used mainly on water heating applications in conjunction with a time switch where low electrical tariffs exist.
- In accordance with IEC947-4-1, BSEN60947-4-1 IEC61095, BSEN61095
- 20A, 24A, 40A & 63A (AC1) resistive switch capacity
- Use with other control devices to increase switching capacity
- 2P, 3P and 4P options with various contact configurations
- 12V, 24V, 48V, 230V AC/DC Coils (except 20A)
- AC/DC rectified coil for silent operation
- Contact position indication
- DIN rail mounting
- Circuit indicator window allowing clear labeling of circuits
Modular Control Devices – Switches Aster -Switches, Push Buttons & Indicator Lamps
Use for the switching of lighting and heating in homes, shops, offices, warehouses, factories and hospitals etc. Indicator lights allow for indication of the status of motors, heaters, fans, pumps etc.
- In accordance with BSEN60699-1, VDE0632
- Switches 16A and 32A
- Mains disconnect switches 63A, 80A and 100A
- 1P, 2P, 3P and 4P configurations
- Pushbuttons 16A
- Indicator lamps in red, green, orange and transparent
- Circuit indicator window allowing clear labeling of circuits
- DIN rail mounting
HabiTEQ™ The pre-wired solution for home automation
HabiTEQ™-Logic is a user-friendly, prewired distribution board fitted with the most frequently requested home automation modules. The HabiTEQ™-Logic is targeted at modern electrical installations, perfectly suited for apartments, residential homes and villas. The Q-Logic range comprises of four standardized distribution boards tailored for complete home automation solutions.
This intelligent “plug and play” automation solution has been designed for easy installation and time saving, requiring only a competent electrician to get things up and running. The system is flexible, allowing addition of various automation blocks like intelligent switches, detectors, displays, SMS and web interface devices to enhance or achieve desired functionality.
Once in place the system can be programmed using a PC through a serial link, giving the home owner complete control over lighting, heating, security , audio , electrical appliances, curtains and blinds through a choice of interfaces. bringing a whole new level of convenience to his living space.
- Seamlessly integrating safety, security, lighting, climate, automated barriers, audio and more ..!! GE HabiTEQ™-Logic provides comfort, control and convenience through multiple stylish user interface (touch screen, switches etc..)..
- Easy to install and infinitely customizable through S/W adding tangible value to builders, installers and homeowners what ever the property apartment,family,homes,villas……
Click here to see Video