GE Products Archives - Page 12 of 15

Pedestals: EH2 Short

Industrial Enclosures, Insulated Wall Mounting Cabinets

Enclosure made of hot moulded, glass fibre reinforced polyeste
Dyed in mass RAL 7035 light grey
Protection degree IP43 according to EN 60529, IEC 60529 and BS 5490
Total insulation
Protection degree IK10 against external impacts according to EN 50102
Corrosion resistant
UV stabilised for outdoor applications
Suitable for use in environments from -35° C to + 125°C
Temporary exceeding temperatures will not be harmful
Fully integrated locking clamp, suitable for operation by a half profile cylindric lock
The cylindric lock can be fitted in a recessed lock box, protected by a vandal proof plastic cap
he enclosure can be accessed by removing the frontal lift-off segment (not hinged)
Fixing holes for threaded inserts M6 are provided in the rear panel allowing direct mounting of busbars, a frame, a mounting plate or components
The bottom is closed with a bottom plate in glassfibre reinforced polyester, allowing for floor mounting or wall mounting
The rainhood shape prevents water stagnation on the roof

Pedestals: EH1

Industrial Enclosures, Pedestals

Small outdoor enclosure with integrated base
Hood grey colour RAL 7036
Ventilated version in thermoplastic engineering polymer
Non ventilated version in hot moulded, glass fibre reinforced polyester
Blackened triangular zamac locking screws, vandalproof and for all seasons
IP43 for the non ventilated hoods
IP23 for the ventilated hoods
Protection degree IK10 against external mechanical impacts according to EN 50102
Base in high density polyethylene (HDPE) RAL 9005
Base resists a ground temperature of -50°C
The upper part of the base serves as a mounting plate and is provided with three slots for fixation points
Easy to install by one person only (weight: 4.5 kg)

Insulated boxes – APO

Industrial Enclosures, Insulated Boxes

The range consists of nine boxes based on the 300 and 185 mm modules
The bases are made of grey (RAL 7035), hot moulded glass fibre reinforced polyester, dyed in mass. These come complete with M4 threaded inserts (Dodge) for fixing a mounting plate or mounting frame
The cover is made of either transparent polycarbonate or opaque grey (RAL 7035) hot moulded glass fibre reinforced polyester, dyed in mass
APO-boxes provide optimum security to both operators and equipment because they feature total insulation and protection degree IP67 according to IEC 60529 and EN 60529
Protection degree IK10 against external mechanical impacts according to EN 50102
This protection covers the total volume of the enclosure according to EN 50298
Each large box is a multiple of a smaller one. Its fixing points are also a multiple of those of a small box. These fixing points are blind holes for M4 threaded inserts
The box can be readily worked with conventional tools, such as drills, cutting mills, saws, punches, etc
Four to six blind holes for M6 threaded inserts are also provided in each base
APO polyester boxes are designed for both wall end pole mounting
The box can be readily worked with conventional tools such as drills, cutting mills, saws punches, etc
Versatile service conditions: polyester enclosures can withstand continuous temperatures up to70°C (peak temperatures up to 150°C) and the transparent polycarbonate covers resist service temperature up to 120°C
APO polyester boxes are maintenance-free and corrosion resistant
Rated insulation voltage Ui = 1000V
APO boxes are UL listed, as per UL Standard 508, types 3, 3R, 4, 4X, 6, 6P, 12 and 13
They are also CSA approved

VJ-Box

Industrial Enclosures, Insulated Boxes

VJ-range consists of seven box sizes in three versions:

with screw cover
with stainless steel hinges
with plastic hinges

The bases and covers are made of grey (RAL 7035), hot moulded, glass fibre reinforced polyester, dyed in mass
They come complete with 4 threaded inserts (Dodge) for fixing a mounting plate
Gaskets that guarantee an optimal tightness degree, are made of polyurethane foam
All fixing hardware is made of stainless steel
The box can be readily worked with conventional tools, such as drills, cutting mills, saws, punches, etc
Versatile service conditions: polyester enclosures can withstand continuous temperatures up to 70°C (158°F) (peak temperatures up to 150°C / 302°F)
VJ-boxes provide optimum security to both operators and equipment because they feature total insulation and protection degree IP67/IP66 according to IEC 60529
Protection degree IK10 against external mechanical impacts according to EN 50102
This protection degree covers the total volume of the enclosure according to EN 50298
VJ polyester boxes are maintenance-free and corrosion resistant
Rated insulation voltage Ui = 1000V
VJ-boxes are UL listed, as per UL Standard 508 and CSA approved as per C22.2 nr. 94 types 3, 3R, 3S, 4, 4X, 6, 12 and 13

Multibox

Industrial Enclosures, Insulated Boxes

11 different basic enclosures ( from 65x65mm up to 361x254mm) with up to 5 different cover depths
Material: made of polystyrene or glass-fibre reinforced polycarbonate
Colour: Grey RAL 7035
High protection degree, IP66-IK07 for polystyrene, and IP66-IK08 for polycarbonate, by means of injected polyurethane seal
Polycarbonate boxes are available with smooth side walls (only one entry) or with several metric knock-outs
Polystyrene boxes are available with smooth side walls or with several metric knock-outs
Opaque grey or transparent covers
Designed for surface mounting
Combinations of heights and widths
Polystyrene boxes are suitable for use in temperatures up to +70°C, polycarbonate boxes are suitable for use in temperatures up to +120°C
Total insulation
High resistance to chemical and aggressive influences
Non-corrosive and maintenance-free
Halogen-free (PC) or low-halogen (PS) materials
Self-extinguishing (UL94-V2)
Rated insulation voltage Ui = 1000V

Why Multibox

Customer-specific developments
Flexible customised entry possibilities
modular tools
modification for low quantities
Different colours available
Complete assembled and equipped units

GE Power Protection offers you: Customer specific developments for all your applications and requirements, exclusively to meet your needs!

Foot Switches / Safety Foot switches – Series IP

Control & Automation, Control and signalling units

Foot switches , for intensive services suitable for controlling and monitoring of low voltage AC and DC electrical circuits.

Comply with IEC 947-5-1 standards
Single, double and triple pedal operation with and without guard
Positive opening contacts operation in slow break and snap action formats
Multi function operation formats: – Spring return Press ‘on’, press ‘off’ Two stage Normal with potentiometer Latching
Spring return NEW Line! Remove point after Latching
Comply with IEC 947-5-1 standards

Controlling and singalling units 30mm – Series 077

Climate Control, Industrial Enclosures

Industrial heavy duty chrome operating and signalling devices
Wide range of opaque and illuminated operating and signalling devices in a wide variety of colours
Wide choice of contact blocks and light source options available
High brightness mono LEDs in blue, red, green, yellow and white colours
Indicating lamp operators with either glass or plastic lenses
IEC947 compliant
Wide choice of accessories and metal pushbutton stations

Control and signalling units diam. 22mm- Series P9

Control & Automation, Control and signalling units

Main Features

The P9 line offers three types of operators:
- round in satin chrome
- round in engineering thermoplastic
- square in engineering thermoplastic
Wide opaque and illuminated operating and signalling devices in a wide variety of colours (6 different colours
Complete range for base and panel mounting
Wide choice of contact blocks and light source options available
Patented operator fixing ring for effective security
Optional anti-rotation feature provided as standard with all operator types
Logic level contact block switching 17v 5mA
Wide range of full voltage power supplies with integrated LED in 6 different colours and 3 different tensions (24V ac/dc – 120V ac – 230V ac) normal and flashing light
High brightness mono LED’s in blue, red, green, yellow and white colours
Indicating lamp operators with either refracted, diffused or glass lenses
IEC947 compliant
Wide choice of enclosed assembled pushbutton stations
Great endurance without maintenance
Low energy consumption
No risk of overheating
Great resistance to vibration and accidental bumps