Pedestals

• Cabinets are made of hot moulded, glass fibre reinforced polyester
• Dyed in mass RAL 7035 light grey
• Three sizes in three widths;all sizes feature the same height and depth
• Each size is available in two protection degrees; IP44 and IP54 according to EN 60529, IEC 60529 and BS 5490
• Delivered in space saving kit-form or factory assembled
• Total insulation
• Protection degree IK10 against external impacts according to EN 50102
• Corrosion resistant
• UV stabilized for outdoor applications
• Suitable for use in environments from -35°C to + 125°C. Temporary exceeding temperatures will not be harmful
• Three point locking mechanism, operated by an integrated handle
• The open doors can be manually unhinged to allow free access for maintenance
• The door opening angle exceeds 180°
• The rear panel has mounting holes for self tapping screws HiLo 7.2 x 26 mm and threaded inserts M8, allowing direct mounting of busbars, a frame, a mounting plate for components
• Supplied with open bottom
• To be mounted on a plinth according to DIN 43629 standard dimensions between the fixation points
• The rainhood shape prevents water stagnation on the roof
• Cabinets can be coupled side to side or double deep
• Cabinets can be coupled together side to side or double depth

• Pedestal and base are made of hot moulded glass fibre reinforced polyester
• Dyed in mass RAL 7035 light grey
• Protection degree IP43/IP44 according to EN 60259, IEC 60259 and BS 5490
• Total insulation
• Impact strength IK10 against external impacts according EN 50102
• Corrosion resistant
• UV stabilised for outdoor applications
• Suitable for use in environments from 135°C to +125°C
• Temporary exceeding temperatures will not be harmful
• Fixing holes for threaded inserts M6 are provided in the rear panel allowing direct mounting of busbars, mounting plate or components
• Inserts to fix a mounting dplate are installed
• The base can be buried into the ground for stable installation of the column
• The rainhood shape prevents water stagnation on the roof
• Pedestal and base are delivered together
• Swing handle for half profile cylindrical lock
• Door opening angle of 180°
• Cabinets with frontal lift-off segments – IP44
• Base and rear panel are moulded as one part
• Recessed lock box for half profile cylindrical lock, protected by a vandal proof cover
• The enclosure can be accessed by removing the frontal lift-off segments (not hinged)

• Cabinets made of hot moulded, glass fibre reinforced polyester
• Dyed in mass RAL 7035 light grey
• Delivered in kit-form (on request: factory assembled)
• Protection degree IP44 according to EN 60529, IEC 60529 and BS 5490
• Total insulation
• Protection degree IK10 against external impacts according to EN 50102
• Corrosion resistant
• UV stabilized for outdoor applications, coated cabinets for increased resistance against UV-corrosion on request
• Suitable for use in environments from -35° C to + 125° C. Temporary exceeding temperatures will not be harmful
• The open door can be manually unhinged to allow free access for maintenance
• Threaded inserts for bolts M10 are moulded in the rear panel, allowing for direct mounting of busbars, a frame or a mounting plate for components
• Supplied with open bottom – To be mounted on a basement according to DIN 43629 standard dimensions between the fixation points
• The rainhood shape prevents water stagnation on the roof
• Cabinets can be coupled together side to side or double deep

EH3 Product Range

• EH3/F – Cabinets with flat surface.
• Four sizes in four different widths; all sizes feature the same height and depth
• Three point locking mechanism, operated by a recessed handle
• The integrated, recessed handle is designed to receive a half profile cylindric lock
• EH3/AP-Cabinets with anti fly posting surface
• Eight sizes in four different widths and two different heights; all sizes feature the same depth
• Three point locking mechanism, operated by a solid handle
• The solid, not recessed handle allows for more usable space inside the cabinet and is designed to receive a half profile cylinder lock
• Profiled door and rear panels make poster sticking difficult and causes poster to drop off

EH3/DC – Pedestals with two separate compartments.

• Two sizes in two different widths, both sizes feature the same height and depth
• Two compartments partitioned for separate functional requirements
• Shipped fully assembled
• Each door has a three point locking mechanism operated by a recessed handle designed to receive a half profile cylindric lock
• The open doors can be manually unhinged to allow free access for maintenance
• To be mounted on a basement according to DIN 43629 standard dimensions between the fixation points
• Cabinets can be coupled together side to side or double depth

EH3/GD – Cabinets with Greater Depth.

• Six sizes in two heights, two depths and three widths
• Shipped fully assembled
• Protection degree IP23 according to EN 60529, IEC 60529 and BS 5490
• Possibility of pivoting door on side or back
• The open doors can be manually unhinged to allow free access for maintenance

• Columns made of hot moulded, glass fibre reinforced polyester
• Dyed in mass RAL 7035 light grey
• Protection degree IP44 according to EN 60529, IEC 60529 and BS 5490
• Total insulation
• Protection degree IK10 against external impacts according to EN 50102
• Corrosion resistant
• UV stabilised for outdoor applications, coated version for improved resistance against UV-corrosion
• Suitable for use in environments from -35° C to + 125°C. Temporary exceeding temperatures will not be harmful
• Fully integrated locking clamp, suitable for operation by a half profile cylindric lock
• The cylindric lock can be fitted in a recessed lock box, protected by a vandal proof plastic cap
• The enclosure can be accessed by removing the frontal lift-off segments (not hinged)
• Fixing holes for threaded inserts M6 are provided in the rear panel allowing direct mounting of busbars, a frame, a mounting plate or components. Inserts to fix the mounting plate are already installed
• The base and the rear panel of the column are molded as one part
• The base allows for stable installation of the column
• For easy access to the inside of the cabinet, the hinged roof offers an opening angle of 90°
• The rainhood shape prevents water stagnation on the roof

• Small outdoor enclosure with integrated base
• Hood grey colour RAL 7036
• Ventilated version in thermoplastic engineering polymer
• Non ventilated version in hot moulded, glass fibre reinforced polyester
• Blackened triangular zamac locking screws, vandalproof and for all seasons
• IP43 for the non ventilated hoods
• IP23 for the ventilated hoods
• Protection degree IK10 against external mechanical impacts according to EN 50102
• Base in high density polyethylene (HDPE) RAL 9005
• Base resists a ground temperature of -50°C
• The upper part of the base serves as a mounting plate and is provided with three slots for fixation points
• Easy to install by one person only (weight: 4.5 kg)